Product Description
The range of Yuken hydraulic products is available to three different Design Standards as follows!a) Those products manufactured for use in Europe and other countries using metric standards aredesigned to meet the appropriate CETOP, DIN and ISO standards and are identified as “80" DesignStandard.b) Those products manufactured for use in North America are designed to meet the appropriate NASUSAS and NFPA standards, and are identified as “90" or “950" Design Standard.c) Those products manufactured for use in Japan are designed to meet the appropriate JlS standards, andhave no suffix to the Design Number.
In addition, if the intemal volume of the ventline is too large, chattering is likely to occur. Thus, as far as possible reduce the inside diametre and the length of thepipe.To adjust the pressure, loosen the lock nut and turn the handle slowly clockwise for higher pressures or anti-clockwise for lower pressures. After adjustments, do not forget to tighten the lock nut. Piping of the tank line should not be connected to any tank line of the other valves, but connected directly to thereservoir.Pressure is limited by collars fitted. If a working pressure cannot be attained, remove some collars. One collar isequivalent to 10 MPa (1450 PS).With a small flow, the setting pressure may be unstable. Use models numbered 03 and 06 with a flow rate above8 L/min (2.1 U.S.GPM) and model 10 with 15 L/min (4.0 U.S.GPM).
| Brand | Yuken |
| Model | BG-10-32 |
| Excavator Model | PC200-7 |
| Media | Gas, Liquid |
| Delivery | 1-5 days |
| Certificates | ISO9001 |
| Cavity | VC10-2 |
| Max Pressure Drop | 10 psi |
| Outlet Type | Bottom |
| End Connection | Female NPT |
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.
Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.
Product Tags:
|
|
Yuken Hydraulic Relief Valve BG-10-32 For Specific Hydraulic Requirements Images
|
