A2FE125/61W-VZL181-S is a hydraulic motor produced by Rexroth, which belongs to the A2F series. This motor is widely used in hydraulic transmission systems in various industries such as construction, road facilities, metallurgy, mining, chemical industry, environmental protection, light industry, machine tools and so on.
The main features of this motor include:
Wide range of applications: suitable for open and closed hydrostatic transmission circuits, as well as traveling machinery and industrial applications3.
Output speed proportional to input flow: output speed is proportional to input flow and inversely proportional to displacement3.
Good power/weight ratio: compact, efficient and economical design3.
Integral conical plunger: with piston ring for sealing, ensuring the sealing performance of the motor3.
The specific parameters are as follows:
Power: 15kW2
Speed: 1500rpm2
Pressure: 35MPa2
Weight: approx. 40kg2
Flow rate: 400L/min2
Working temperature: 80°C2
Color: customized2
Notes for use:
Pump steering: always according to clockwise rotation (from the end of the shaft), if you need anti-clockwise rotation or for motor, must be specified when ordering.
Connection between pump and motor: concentricity is required, otherwise it will produce noise, efficiency reduction and other failures2.
Self-priming ability: the pump has a certain self-priming ability, can be installed on the tank to use, the suction height is not more than 0.5 meters 2.
Preparation before initial startup: Before the first startup, the pump casing must be filled with clean working fluid through the oil drain port.
Working medium: No. 20 or No. 30 hydraulic oil is recommended, or mechanical oil with E50=3~5 and viscosity index not greater than 90 can also be used.
Maintenance: Regularly check the cleanliness of the fluid and replace the hydraulic oil regularly to improve the service life and use efficiency of the pump.
Technical specifications
| Maximum vacuum flow rate | N/A |
| Technology | Hydraulics |
| Displacement | 50 inch3/rev,60cm3/rev,350 bar |
| Valve body material | Cast iron |
| Work pressure | 3000 psi |
| Flow velocity | 28 Gal/min |
| medium | Hydraulic |
| weight | 60KG |
| Installation plan | SAE |
| Shaft type | SAE |
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,
Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.
Product Tags:
|
|
100rpm Hydraulic Plunger Pump High Pressure A2FE125/61W-VZL181-S Images
|
